User Manual

88
Building Your Max-Trainer
7. Using the M3 x 25mm Cap head bolts, washers and nylock nuts t your engine to the mount. The
engine will look offset and this is intentional to help make the model y straight and level. Connect the
feed line to the carburettor and then one of the vent pipes to the exhaust. The other will be used to ll the
tank with fuel, this can be passed through the oil drain hole on the bottom of the fuselage, you will need a
method of plugging this line when in use. All three of these tubes can be cut to length to keep everything
tidy.
6. Install the fuel tank in to the fuselage and thread the pipes through to the engine bay. Secure the
fuel tank in to the bay using the Velcro strap.