Service manual

Page 4-10 SATO D508/D512 Service Manual
LABEL SENSOR REPLACEMENT
1 Turn the printer OFF and disconnect the power supply cord.
2 Remove all media from the printer.
3 Remove one screw (1) (See Figure 4-8a) that secures the bar (2) to the printer (3).
4 Remove one screw (4) and gear (5) from the printer (3).
5 Lift away the left-side media holder (6) from the printer (3).
6 Remove one screw (7) that secures the sensor cover (8) to the left-side media holder (6).
7 Remove one screw (9) that secures the sensor (10) to the sensor cover (8).
Figure 4-8a, Label Sensor Replacement
4
5
1
2
3
6
9
10
8
7