Service manual

Unit 4: Replacement Procedures

SATO D508/D512 Service Manual Page 4-5

FUSE REPLACEMENT

1 Turn the printer OFF and disconnect the power supply cord.

2 Remove the base cover from the housing cover to access the fuse.

3 Locate fuse (1), (See Figure 4-4) on the main circuit board (2).

4 Detach the defective fuse (1) from the metal holders (3).

5 Attach a replacement fuse (1) to the metal holders (3) on the main circuit board (2).

6 Attach base cover to the housing cover.

7 Load some media, and run some tests to confirm proper function.

Figure 4-4, Fuse Replacement