Service manual

Page 3-4 SATO D508/D512 Service Manual
Data input error Ensure correct data stream
MEANDERING MEDIA
Incorrectly loaded media Ensure correct loading
Improperly adjusted media guides Adjust as required
Worn or improperly adjusted platen roller Adjust. Replace as required
PRINTER CREATES A BLANK LABEL
Data input error Ensure correct data stream
Improper media selected Ensure correct media is in use
Disconnected print head Cycle off power and ensure proper connection
Defective print head Replace print head as required
Defective main board Replace main board as required
INCORRECT LABEL POSITIONING
Incorrect sensor selection Ensure the correct sensor is selected
Improper sensor adjustment Adjust as required
Incorrect media in use Ensure the correct media is being used
Data input error Ensure correct data stream
NO PRINTED IMAGE