Service manual

Page 2-2 D508/D512 Service Manual
1.1 BASIC PRINTER SPECIFICATIONS
Attribute
PRINT
Print Method Direct Thermal
CPU 32-bit RISC processor
Printer Command Language SBPL
Resident Fonts U
S
M
XU
XS
SM
WB
WL
XB
XL
CG Times
CG Triumvirate
OCR-A
OCR-B
Font Memory 4 MB
Print Head Resolution 8 dots per mm for 203 dpi | 12 dots per mm for 305 dpi
Print Speed 6 ips
Max. Print Area 104 mm (width) by 400 mm (pitch)
MEDIA
Label Thickness
(Label + backing paper)
0.06 mm* ~ 0.19 mm
(*Check with your dealer regarding conditions
for using thin 0.06 mm labels)
Label Form Roll Label : Maximum outer diameter of 110mm (face out),
Core Inner Diameter of 40mm
Fan-fold label : Max foldable height 100 mm (loaded externally)
Label Size (adhesive labels) For continuous feed:
Width: 25~115 mm (including liner 28~118 mm)
Pitch: 15~397mm (including liner 18~400 mm)
For Cutter usage (optional):
Width: 25~115 mm (including liner 28~118 mm)
Pitch: 20~397mm (including liner 23~400 mm)
For Tear Off mode:
Width: 25~115 mm (including liner 28~118 mm)
Pitch: 15~397mm (including liner 18~400 mm)
Label Size (non-adhesive labels) For continuous feed or tear off mode:
Width: 25~118mm
Pitch: 15~400 mm
With cutter installed:
Width: 25~118mm
Pitch: 20~400 mm
SENSING
See-Through for labels or tags 0.012” (3 mm)
Continuous Form Sensor not used
Eye Mark Fixed, 0.25" (6.3 mm) from left label edge. 0.12” (3 mm) wide x mini-
mum 0.5” (12 mm) in length from left label edge.
*All specifications subject to change without notice.