Service manual

Page 1-13 SATO D508/D512 Service Manual
DIP SWITCH SETTINGS (CONT’D)
Switches 1–3: Font/Graphic loading settings
Enables the loading of fonts and/or graphics into
printer memory for faster retrieval.
Switch 4: Unused
This switch is reserved for future use.
Switch 5: Head Check
Enables or Disables the printer function that checks
the print head automatically.
Switch 6: VR1 Potentiometer Adjustment mode
Selects the function adjusted by VR1. When placed
in the OFF position, VR1 will adjust the media tear-
off / cut (backfeed distance) offset value over a
range of +/- 3.75 mm. When placed in the ON
position, VR1 will adjust the print darkness range.
DSW1 DSW2 DSW3 Mode
Off On On Load Font
Configuration Switch
ON
OFF
12345678
DSW4 Mode
Off DT
On Reserved
Configuration Switch
ON
OFF
12345678
DSW5 Mode
Off Disabled
On Enabled
Configuration Switch
ON
OFF
12345678
DSW6 Mode
Off Media Tear-Off
On Print Darkness
Configuration Switch
ON
OFF
12345678