Service manual

Unit 1: Overview
SATO D508/D512 Service Manual Page 1-10
CONFIGURATION
Before using the printer, it is best to read this manual thoroughly first. Otherwise, you may disturb
default settings around which the instructional procedures in this manual are based upon.
3.1 OPERATING PANEL
The Operator Panel consists of three LED indicators and three switches.
POWER
The green LED lights up when the printer is ON.
ERROR
The red LED lights up when there is a system fault
such as an unlatched print head.
ON LINE
The green LED lights up when the printer is ON LINE
and ready to receive data. The ON LINE button
takes the printer ONLINE or OFFLINE.
LINE Button
If the ONLINE LED is lit, pressing it will take the printer
OFFLINE. Pressing the button again then takes the printer
back ONLINE. When ONLINE, the printer is ready to
receive data from the host. When OFFLINE, the printer
will not print or accept data from the host. While the
printer is printing, press this button to suspend the
printing. To resume printing, press this button again.
FEED BUTTON
Press this button to eject one label in OFFLINE mode.
Hold this button down while power is applied, to print a printer
status label.
POWER SWITCH
A two position switch for turning the printer ON (I) or OFF (0).