Smart Home MA User Manual Max1 Motion Activated LED Light MAX-One-HD1a www.maxsmarthome.
GETTING STARTED DIMMING & RESET BUTTON SIMPLY PLUG IT IN! Simply plug it into a standard 120VAC outlet. Reset Button Dimming Button MODE POSITION (TOP TO BOTTOM) Select the desired Mode for your MAX: Position 1 Night Light Mode Position 2 Motion Activated Light Mode Position 3 Security Mode - Activated by Motion Sensor Position 4 OFF FIG3 Press and hold down to Increase or Decrease Brightness in any Mode. Reset: If Alarm has been sounded, press button once to reset.
FLASHLIGHT / AREA LIGHT SELECTION FEATURES To use Flashlight Mode, unplug unit from AC power and place in any mode position except for OFF. LIGHTING: Press Dimmer /Reset Button to toggle between front light and flashlight. CHARGING THE MAX WITH MICRO USB You can charge the MAX with the Micro USB port on the back of the MAX below the AC Plug. You can charge from a Standard USB port from a computer or a USB wall adapter.
RADIATION EXPOSURE STATEMENT CAUTION This device complies with FCC radiation exposure Risk of Electric Shock and Fire Hazard. For adult use limits set forth for an uncontrolled environment. only. This is not a toy and Is not intended for use by This equipment should be installed and operated children. For safe use, plug only into exposed wall with a minimum distance of 20 cm between the outlet where the device is ventilated and cannot unit and your body. contact bed covering or other material.
LIMITED ONE YEAR WARRANTY WARRANTY REPLACEMENT PROCEDURES MAX Smart Home warrants this product to be free of 1. Go to www.maxsmarthome.com/returns or Call defects in workmanship and/or materials for one 1-855–999-8139 (Toll Free) to get a Return Authorization year from the date of purchase. If such defect Number (RA#) and shipping instructions. should arise during the one year period, MAX Smart 2.
