Specifications

T-Max® Manager/Pro and T-Max® 3A User’s Guide Page 5
ADNET-Repeater (Optional), (may be needed in larger salons):
Connects in the middle of the daisy chain to amplify the communications signal.
1.2 Specifications
T-Max® Mgr/Pro:
Power Supply
IN - 120VAC
OUT - 9 DC @ 1Amp
Current Draw
800mA
Dimensions
12.75” x 5.5” x 1”
Communication
T-Max® Mgr/Pro - PC RS-232C, 9600 Baud, 8Bit, 1 Stop Bit, No Parity
T-Max® 3A:
Power Supply
IN - 120VAC
OUT - 9-12V (DC or AC) @ 800mA
Current Draw
200mA
Dimensions:
Cover Plate: 5.25” x 5.25”
T-Max® 3A PCB: 2.5: x 3.75” x 1.5”
Relay:
220VAC @ 5A; SPST Form A
Display:
T-Max® Mgr/Pro: 64 dual color lights showing bed status.
1, 16x2 VFD display shows individual bed time and status.
T-Max® 3A: 1, 2 digit LED display showing bed time and status.
Maximum Units:
128 T-Max® 3As controlling 128 beds.
8 T-Max® Mgr/Pro’s can be used to control up to 128 beds.
1 Computer can be connected to each T-Max® Mgr/Pro.
1.3 Optional PC Hardware Requirements
1) 32KBytes available RAM.
2) 1.4MBytes available Hard Disk Drive Space.
3) 1 available RS232 port.
4) IBM AT, 286, 386, 486, Pentium or Compatible.
1.4 Optional PC Software Requirements
1) MS-DOS® 3.1 or higher.
2) Windows® 95/98/NT.
2 Quick Installation
2.1 Connecting the T-Max® Timing System
Note: Customers should not be in tanning bed when auto addressing beds.
1) 1) Install a T-Max® 3A in each room. Install the T-Max® Mgr/Pro at the front desk.