Specifications

T-Max® Manager/Pro and T-Max® 3A User’s Guide Page 26
Rescan Get Param SeNd Param Load Version [ESC] Exit F2 Main Menu
Salon Systems, Inc. ADNET Utility Program
Unit # Time Status Type/Version Max Time
1).
0.00
READY 15/39 20
2).
0.00
READY 15/39 30
3).
0.00
READY 15/39 20
4).
0.00
READY 3/8 40
5).
0.00
READY 15/39 30
6).
0.00
READY 15/39 20
7).
0.00
READY 3/8 30
8).
0.00
READY 15/39 20
9).
----------------- Not Present -----------------
10).
----------------- Not Present -----------------
11).
----------------- Not Present -----------------
12).
----------------- Not Present -----------------
13).
----------------- Not Present -----------------
14).
----------------- Not Present -----------------
15).
----------------- Not Present -----------------
16).
----------------- Not Present -----------------
ADNET.EXE Alternate Menu Screen
Command Descriptions
Rescan - Causes the T-Max® Mgr/Pro to rescan. Press R.*
Get Param - Displays values stored for a given parameter. Press G.*
SeNd Param - Changes desired parameters of timers. Press N.*
Load - Loads the MGRPLS1.BIN file to the T-Max® Mgr/Pro. Press L.
Version - Displays software version number and updates the computer screen after a
configuration change. Press V.
F2 - Displays Main Menu. Press the F2 key.
* If more than one T-Max® Mgr/Pro is being used, only the Master T-Max® Mgr/Pro can use these functions.
6.5.1 Delay - Entering a delay
1) Press D
2) A window will appear and read as follows:
Existing Delay Time: 3
Enter NEW Delay Time in Minutes ->
Enter the delay time desired followed by the Enter key. You cannot enter a delay time beyond
10 minutes. If you want no delay time, enter 0.
Note: The delay you enter will be for every bed in the salon. This value is not saved to disk.
Every time ADNET.EXE is loaded, the delay defaults to 3 minutes. If you wish to use Infinite
Delay, Refer to Section 5.2.1.