Specifications

T-Max® Manager/Pro and T-Max® 3A User’s Guide Page 25
The following screen will appear:
Bank Tan Delay Hours Sessions Auto [ESC] Exit F1 Alt Menu
Salon Systems, Inc. ADNET Utility Program
Unit # Time Status Type/Version Max Time
1).
0.00
READY 15/39 20
2).
0.00
READY 15/39 30
3).
0.00
READY 15/38 20
4).
0.00
READY 3/8 40
5).
0.00
READY 15/39 30
6).
0.00
READY 15/39 20
7).
0.00
READY 3/8 30
8).
0.00
READY 15/39 20
9).
----------------- Not Present -----------------
10).
----------------- Not Present -----------------
11).
----------------- Not Present -----------------
12).
----------------- Not Present -----------------
13).
----------------- Not Present -----------------
14).
----------------- Not Present -----------------
15).
----------------- Not Present -----------------
16).
----------------- Not Present -----------------
ADNET.EXE Main Menu Screen
Display Descriptions
Unit # - Bed Number or address of T-Max® 3A.
Time - Session time, Delay time or Cool Down time remaining
Status - Bed Status: “READY”, “ON”, “DIRTY”, ”PAUSE” or “COOL”.
Type/Version - T-Max® 3A software version.
Max Time - Maximum time programmed into each T-Max® 3A.
Command Descriptions
Bank - Displays the next 16 beds. Press B
Tan - Starts a session. Press T.
Delay - Sets delay for every bed. Press D.
Hours - Displays bulb hours for each bed. Press H.*
Sessions - Displays how may sessions the timer has run. Press S.*
Auto - Sets the bed to start immediately after delay or places the T-Max® 3A in
pause. Press A.
ESC - Pressing the ESC key exits the program. Press the ESC key.
F1 - Switches to Alternate Menu. Press the F1 key.
*If more than one T-Max® Mgr/Pro is being used, only the Master T-Max® Mgr/Pro can use these functions.