Specifications

T-Max® Manager/Pro and T-Max® 3A User’s Guide Page 19
6.3.2 Manager Access Screen
The upper left corner of the Manager Access screen shows <Manager Status> and <Bed
Parameter Utilities>. These are discussed in Sections 6.3.6 and 6.3.5. The right side shows the
beds you have and their statuses.
The left side of the screen is an activity log. This is to aid in trouble shooting. The right side of
the screen shows bed status.
Bed - Bed number
Time - current time.
Status - Status if the timer (Ready, On, Pause, Delay, Dirty or Cool)
Type - Type of timer in each room.
Vers - Software version in each timer.
Max - Maximum time for each timer.
6.3.3 Starting a Session.
1) Place the mouse in the Time window beside the bed number that you want to start.
2) Press the Left mouse button.
3) The Start Session window will appear. Enter the bed number you want to start and the
desired session time in minutes.
4) Click Yes. If you don’t want to start a session, click No.
5) The session will start and the display will show the bedtime and status.
6.3.4 Canceling a Session.
1) Place the mouse in the Time window beside the bed number you want to Cancel.
2) Press the Left mouse button.
3) A cancel session window will appear. If the displayed bed is correct, press Yes. If the
displayed bed is not the bed you want to cancel, enter the correct bed number click Yes with
your left mouse button. If you don’t want to cancel any session, click No.