User Manual

MANUAL SUPER POWER Series 325 HYD Model 250 01/05/2004
To ensure a proper installation, correct usage and long-lasting enjoyment of this
equipment, please take time to read this manual thoroughly.
Table of Contents
Number Description Page
1 General Installation Guidlines 2
2 Tunnel 2-3
3 Propeller Drive Leg & Motor Support 3
4 The Hydraulic Motor and its Adapter 4
5 Propellers 4
6 Protection Grill 4
7 Hydraulic General Remarks 4-5
8 Hydraulic Specifications 5
9 Hydraulic Custom Pack 6
10 Maintenance 7
11 Notes 8
12 Spare Parts List 9
13 Spare Part Diagram 10
14 Control System Connections: Electro-Hydraulic Pump 11
15 Control System Connections: Motor with Clutched PTO 12
16 Super Power Hydraulic Diagram 13
17 Positioning and Measurements 14
18 Warranty Procedures 15-16
19 List of Distributors 17-18
20 Warranty Document (to be returned) 19
Your thruster is a high quality technical product and should be treated as such. The employment
of qualified marine personnel, with experience in bow thruster installation, is strongly advised.
Where possible, the boat manufacturer’s architects, design departments and/or shipyards should
be consulted, prior to installation taking place. For any boat requiring official classification, bodies
of approval should also be consulted at the earliest opportunity. In any case, all other bodies,
governmental or otherwise, should be contacted to ensure conformity with legal regulations
relating to the boat in question.
Your thruster should be delivered with the following parts:
Hydraulic Motor &
Coupling
Motor Support Controller HYD Drive Leg, Propeller
Pin(s) & Coupling
Propellers (2) Safety Stickers x 2 Manual
1