Full Product Manual

CLEANING, MAINTENANCE, AND LUBRICATION
MAINTENANCE
1. BEFORE EACH USE, inspect the general condition of the tool. Check for:
• Loose hardware,
• Misalignment or binding of moving parts,
• Cracked or broken parts, and
• Any other condition that may affect its safe operation.
2. AFTER USE, wipe external surfaces of the tool with clean cloth.
Jack positioned for use
Jack rotated for travel/storage
1
2
Steps to
rotate Jack
Figure C: Jack Positions
TO PREVENT SERIOUS INJURY:
Remove Jack from trailer before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs,
have the problem corrected before further use.
5. Turn the Crank counterclockwise to lower the Jack slightly, transferring the
trailer weight onto the towing vehicle.
6. Pull out the Swivel Handle, and rotate the Jack into its horizontal position.
Assure that the Swivel Handle pin is in place, locking the Jack into the raised
horizontal position before moving the trailer.
7. Attach the safety chain (sold separately).
[e-mail]
6
1-800-348-5004