Installation Guide
4
21. ONLY TRAINED OPERATORS should operate this lift. All non trained personnel should be kept away from work
area. Never let non trained personnel come in contact with, or operate lift.
22. USE LIFT CORRECTLY. Use lift in the proper manner. Never use lifting adapters other than what is approved by the
manufacturer.
23. DO NOT override self closing lift controls.
24. REMAIN CLEAR of lift when raising or lowering vehicle.
25. CLEAR AREA if vehicle is in danger of falling.
26. ALWAYS ENSURE that the safety locks are engaged before any attempt is made to work on or near vehicle.
27. DRESS PROPERLY. Non skid steel toe footwear is recommended when operating lift.
28. GUARD AGAINST ELECTRIC SHOCK. This lift must be grounded while in use to protect the operator from electric
shock. Never connect the green power cord wire to a live terminal. This is for ground only.
29. DANGER! The power unit used on this lift contains high voltage. Disconnect power at the receptacle before
performing any electrical repairs. Secure plug so that it cannot be accidentally plugged in during service.
30. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses. They are not safey
glasses.
31. MAINTAIN WITH CARE. Keep lift clean for better and safe performance. Follow manual for proper lubrication and
maintenance instructions. Keep control handles and / or buttons dry, clean and free from grease and oil.
32. STAY ALERT. Watch what you are doing. Use common sense. Be aware!
33. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts, breakage of parts or any condition that may
aect its operation. Do not use lift if any component is broken or damaged.
34. NEVER remove safety related components from the lift. Do not use lift if safety related components are damaged or
missing.
NOTE: If attachments, accessories, or conguration modifying components that are located in the load path, aect
operation of the lift, aect the lift electrical listing or aect intended vehicle accommodation are used on this lift
and, if they are not certied for use on this lift, then the certication of this lift shall become null and void. Contact
Dannmar Equipment for information pertaining to certied attachments, accessories, or conguration modifying
components.
SHIPPING DAMAGE CLAIMS: WHEN THIS EQUIPMENT IS SHIPPED, TITLE PASSES TO THE PURCHASER UPON RECEIPT FROM THE CARRIER.
CONSEQUENTLY, CLAIMS FOR THE MATERIAL DAMAGED IN SHIPMENT MUST BE MADE BY THE PURCHASER AGAINST THE TRANSPORTATION
COMPANY AT THE TIME SHIPMENT IS RECEIVED.
When removing the lift from the shipping angles pay close attention as the posts can slide and can cause injury. Prior to
removing the bolts make sure the posts are held securely by a fork lift or some other heavy lifting device.