Installation Guide

30
1. Install the Safety Latch Release on the Safety Weldment Pin.
2. Slide the Retaining Ring on to the Safety Weldment Pin.
3. Slide the Safety Release Assembly onto the Safety
Release Plate on the Post.
4. Insert the Clevis Pin through the Torsion Spring.
5. Insert the Clevis Pin through the Safety Weldment and
the Release Plate.
6. Insert the second Torsion Spring on to the Clevis Bolt.
7. Attach the Cotter Pin to the Bolt.
8. Attach the Safety Cover with two M6 Screws.
Retaining Ring
Safety
Latch
Release
Safety
Weldment
Safety Cover
M6 x 10 Screw
Cotter Pin
Torsion Spring
Clevis Pin