User manual

Preliminary MAVIX
- 6 -
Figure 1: MAVIX Management Architecture
The System Configurator is the main tool for configuring building and maintaining
the system, as well as testing and adjusting the devices (Cameras, monitors, Audio
units ...) which it contains. And therefore will serve as the basis for the operation of
all entities Without a properly installed System Configurator, all other applications:
Maview Player, StreamR and Console will not run.
It is therefore recommended that prior to installing any application, you first install
and run the Configurator to setup the system. Once the system has been properly
configured and tested, you may continue to install other applications. A typical
installation consists of one or more Geographical sites, each of which may contain
Surveillance components (cameras, intercoms, monitors, PAS, VMS, sensors, relays,
etc) and recording units (StreamR). Every operator either using or configuring the
system, is assigned a User Login ID and Password which he should use to access all 4
applications .