User manual

Preliminary MAVIX
- 45 -
which includes defined preset quick buttons. The PTZ command center performs the
commands on the selected camera, provided it is defined as a PTZ device by the
System Configurator.
Figure 22: Console: Control area
Figure 22: Console: PTZ control
GENERAL COMMANDS:
The general commands defined are: Start Recording, Stop Recording, Setup and
Change operator
o Start Recording:
After selecting a camera, the video stream from that
camera may be recorded by selected this command. This command
sets an event in the alarm log.
o Stop Recording:
stops the recording.
o Change Operator:
allows the change of the operator without having to
exit the application. When selecting this command, the system
prompts for a new user name and password.
o Setup:
This command opens the Graphic Editor feature, as described
below