User manual

Preliminary MAVIX
- 34 -
STREAMR RECORDING APPLICATION
The StreamR Recording application is the video recording application that performs
the Recorder functionality. The StreamR is factory installed in the StreamR hardware
unit. Similar to any other Mavix application, the StreamR depends on the system
configuration file, but also has a local database created during the setup process of the
unit, as described below. To enter the setup window the user should press the setup
button while the slide bar is in progress, skipping that stage will bring the user
straight into the main (and only) window of the Stream Application, and the Recorder
will start recording right away, provided any cameras are defined for the current user
and at least one has been selected for recording, otherwise the application will exit
displaying the following message.
The setup window (See figure 16) allows the user to perform all necessary setup
procedures prior to the actual recording. Once the user enters the main setup dialog
window after entering his ID and Password, he will be presented with a list of
available cameras. By default all available cameras are selected for recording,
unchecking a camera on the list will exclude it from the active recording list (until
checked again). Bellow the list of cameras there are additional parameters for the
user to specify :