User manual

Preliminary MAVIX
- 13 -
Configure & Test
The Configure & Test process of the system includes the setup of all required
parameters for the system components, such as video parameters (resolution,
brightness, contrast, etc), audio parameters (volume), recording parameters,
serial port connection parameters and network parameters (frame rate, bit
rate). As well as the connections between the different units (Camera to
Monitor,Microphone to Speaker, Transparent RS232 and I/O connection)
The Configure & Test Process should be performed after completion of the
System Building Process as described above, and after physically connecting
the units to the network. The tabbed window contains four different forms:
Video, Audio, RS232, Digital I/O. (See figure 5)
1. VIDEO: The video Configure & Test window allows the user to control
the video parameters as follows :
Video Standard (PAL\NTSC)
Color/BW
Resolution (MR1000 type): Full, SIF, QSIF, QQSIF, QQQSIF.
Resolution (MR100 type): 2CIF, CIF, QCIF .
Resolution (MR 150 type): 4CIF, 2CIF, CIF, QCIF.
GOP (
Group Of Frames) (0 – 500) (MR 100 and 150 types)
Frames per second: NTCS: (Full, 30, 15, 10, 7.5, 6, 5, 3, 2, 1, 1/2,
1/5, 1/10)
Frames per second: PAL: (Full, 25, 12.5, 8.3, 6.25, 5, 3.12, 2, 1.5, 1
1/2, 1/4, 1/10.
Brightness.
Contrast.
Saturation.
Bit Rate (MR1000 type): 1000 to 9000 bps.