User manual

Preliminary MAVIX
- 10 -
The user should allocate a significant and unique name to the unit,
allocate the required IP address and select the type of unit. (listed
above).
The interface in a graphical, tree like presentation, displays the list of defined
entities. The User may add new units, remove or edit defined units by pressing
the ADD or REMOVE buttons or by double-clicking an existing unit for
editing. (See figure 2). A Ping function allows the user to check or scan for
live units in the network. (See figure 3)
Duplicate
Instead of adding units manually in single steps, any defined station may be
automatically duplicated (cloned) along with its devices. The user may mark
any station from the units tree (on the left side of the form), and press the
duplicate button. A dialog will appear asking the user to select the number of
times he would like to duplicate the station. (1 – 50). IP addresses and station
names will generated automatically in an incremental order, starting from the
values of the original station. After pressing the apply button, all new stations
will be added and displayed on the station list. This option should save the
user time when adding units to an empty database.
Remove All
Pressing the Remove-All button on the upper left corner of the
window, will delete all defined units from the system. After deletion,
an empty system tree will be displayed. (All defined sites containing
units, will be deleted too). (See figure 2).