Users Manual

NANO POWER
Digital Radio
Commercial in Confidence
© Copyright 2020, Mavenir 18 | P a g e
Buckle Up and Connect Wire
Figure 23. Connecting Bar over Hooks on Bracket II
1. Clip the bar on paired Bracket III over the hooks on
Bracket II.
Figure 24. Wire Connection Diagram
2. Connect the power cable and fiber cable to N2RU
Note: Connect power cable first and then power it on. Do
NOT connect the powered cable to the N2RU in case of
excessive current impulse.
3. Engage the rotary hook on Bracket IV into Bracket II