Users Manual

NANO POWER
Digital Radio
Commercial in Confidence
© Copyright 2020, Mavenir 11 | P a g e
Figure 7. Fix A2 with Screws
3. Secure the A2 using 2 screws M6×16 on
both sides and the Phillips screwdriver.
Figure 8. Separation of Adjacent A2
For rack installation, it is highly recommended to
use a fan tray in the middle of 2 adjacent A2 for
cooling.
Note: It will reduce service life if A2 is
continuously working in environment of high
temperature.
Connect Power and Ground Cable to A2
Figure 9. Connect Power Cable at Rear Side
1. Connect and lock the power cable at the rear
of the A2.