Users Manual

NANO POWER
Digital Radio
Commercial in Confidence
© Copyright 2020, Mavenir 10 | P a g e
Attach A2 Handle
Figure 4. Attaching a 19" Mounting Bracket
1. Attach the 19" mounting brackets at the
front of the A2, using 4 screws M3×16 per
bracket and the Phillips screwdriver.
Observe the orientation of the brackets.
Attach Sliding Rails and A2 to Rack
Figure 5. Attached Sliding Rails
1. Attach the sliding rails Ⓑ to the rack.
Note: the sliding rails are not included in the
delivery.
Figure 6. Place A2 in Rack
2. Place the A2 in the rack.