Installation Instructions

nanoLTE E61 AP Hardware Installation Introduction
NANO_INST_43325 v205_0.6 for N4G_2.5 © ip.access Limited 2019 Page 1
1 Introduction
The nanoLTE E61 AP from ip.access is a compact Small Cell that provides LTE TDD
capability. The E61 AP is targeted at indoor enterprise applications.
This manual provides important information on installing the E61 AP hardware.
1.1 Overview
This manual is organised as follows:
• This introduction
• An overview of E61 AP installation, including site requirements
• E61 AP hardware installation
• Troubleshooting
• Regulatory warnings and safety information
1.2 Warnings and Regulatory Information
For all warnings and regulatory information, see section 6.
1.3 Related Information
1.4 Licenses and Copyright Notices
Portions of the AP software are constructed from third-party software and open source code
and ip.access Ltd gratefully acknowledges the contributions that these libraries,
technologies and components have made to the product. Each of these is supplied under
the terms of a license agreement and these are either reproduced or referenced in
[REF_43005], in line with the stipulations of their authors.
1.5 Terminology
Common System terminology is defined in [REF_11105].
For additional terminology, see [21.905].
[INST_13400] AP Pre-Provisioning and Configuration (NANO_INST_13400)
[REF_11105] System Glossary (NANO_REF_11105)
[REF_43005] nanoLTE AP Open Source Software (NANO_REF_43005)
[TRB_13005] AP Troubleshooting (NANO_TRB_13005)
[21.905] Vocabulary for 3GPP Specifications (3GPP TR 21.905)