Installation Instructions

nanoLTE E61 AP Hardware Installation AP and PSU Regulatory Information
NANO_INST_43325 v205_0.6 for N4G_2.5 © ip.access Limited 2019 Page 31
6 AP and PSU Regulatory Information
This chapter provides the customer with safety and regulatory warnings, cautions and
information for the ip.access Ltd range of products.
• 6.1 Warnings and Cautions - nanoLTE E61 AP
• 6.2 Warnings and Cautions - Optional Power Supply Unit
• 6.3 Regulatory Statements for the E61 AP
• 6.4 Regulatory Statements for PSU
6.1 Warnings and Cautions - nanoLTE E61 AP
Electrical Safety
Interference with Electronic Devices
CAUTION
The AP is intended for dry indoor applications only. If evidence of condensation is
present do not apply power to the AP.
CAUTION
The AP is designed to be operated as a fixed system device and must be located
away from the user. It must be mounted in a manner to ensure that all users and
bystanders are kept a minimum of 20cm away from the connected antennas at all
times.
WARNING
Do not immerse any part of the AP in water or any other liquid. Do not install or use the
AP near open water. Do not spill liquids of any type on the AP.
WARNING
Do not use liquid, solvent or aerosol cleaning agents on or near the AP.
CAUTION
To avoid the risk of fire and/or electrical shock, do not push objects through openings
into the AP. The only exception is the recess for the Reset switch.
CAUTION
Do not disassemble the AP.
CAUTION
Before connecting a power supply the AP, verify that the power supply meets the
power requirements of the AP.
CAUTION
To avoid the risk of fire and/or electrical shock, do not overload power outlets or
extension cables.
CAUTION
If using a pacemaker, ensure you are using the device in accordance with its safety
requirements with respect to RF devices. Consult your doctor if you have questions
about RF signals and your pacemaker.