Installation Instructions
Table Of Contents
- nanoLTE E61 AP Hardware Installation
- Table of Contents
- 1 Introduction
- 2 Installation Overview and Requirements
- 3 nanoLTE E61 AP Commissioning
- 3.1 Requirements for Commissioning with the Web Page
- 3.2 Redirector First Contact and NTP Synchronisation for Software Update
- 3.3 Configure a Commissioning Terminal
- 3.4 Access the Commissioning Web Page for the LTE AP
- 3.5 Optional - Software Download
- 3.6 Configure the Connection to the NOS Server
- 3.7 Commissioning Complete
- 4 nanoLTE E61 AP Hardware Installation
- 5 Troubleshooting
- 6 AP and PSU Regulatory Information
nanoLTE E61 AP Hardware Installation Troubleshooting
NANO_INST_43325 v205_0.6 for N4G_2.5 © ip.access Limited 2019 Page 29
GPS
Off The LED is Off if the AP has not yet achieved GPS lock or if
the AP has lost GPS lock.
Note: If the AP is configured to use GPS synchronisation, it
will not start transmitting if it cannot obtain GPS lock and
similarly will stop transmitting if it loses GPS lock.
Green This LED is Green when the AP has achieved GPS lock. The
E61 AP has a GPS connector on the back panel for an
external GPS antenna.
LED Colour Description