Installation Instructions

nanoLTE E61 AP Hardware Installation nanoLTE E61 AP Commissioning
NANO_INST_43325 v205_0.6 for N4G_2.5 © ip.access Limited 2019 Page 17
9) Enter the commissioning user name and the password (supplied separately for
security reasons). After entering the correct user name and password, the LTE AP
Commissioning page appears:
3.5 Optional - Software Download
If it is necessary to download a software package to the AP, this must be done before
configuring the connection to the NOS Server.
This can only be done if the commissioning terminal is running a web server that provides a
path to any ip.access AP software download packages. That is, the required .sdp files must
be present on the commissioning terminal.
Setting up a web server for this purpose on the commissioning terminal is outside the scope
of this manual.
Use the SW Download page to:
• Inspect the current version of software that the LTE AP is running.
• Download a new version of AP software to the LTE AP from the commissioning
terminal to the standby memory bank. The LTE AP reboots to the new version of
software when the download is complete and verified.
1) If it has not already been done (as in section 3.2), ensure the LTE AP has updated
its clock time with NTP and also updated its "last known time". This must be done
before downloading any new software to the LTE AP. To do this, connect the LTE
AP to the Internet and reboot it. The LTE AP must be left in this state for an hour to
ensure it updates its "last known time", which is preserved when the LTE AP is
restarted again to reenter the commissioning web page. Then reconnect the LTE
AP to the commissioning terminal and restart the web page.