Installation Instructions

nanoLTE E61 AP Hardware Installation nanoLTE E61 AP Commissioning
NANO_INST_43325 v205_0.6 for N4G_2.5 © ip.access Limited 2019 Page 11
3 nanoLTE E61 AP Commissioning
Use the procedures in this section to configure the E61 AP with the settings it needs to
establish a connection with its serving NOS Server. Once commissioning is complete, use
the NOS Client for any remaining configuration and to bring the AP into service.
There are two LTE AP commissioning methods:
• Redirector Only Commissioning
The Redirector supplies the NOS connection parameters in the DOCP. In this
case, all the LTE AP requires is a connection to the Internet so that it can connect
to the Redirector. No other commissioning activities are possible. This is the
easiest way to commission an nanoLTE E61 AP. In this case, proceed to the
hardware installation procedure in section 4.
or
• Redirector Enables the Commissioning Web Page
The Redirector supplies the AP with a DOCP that enables the built-in
commissioning web page. The AP is not provided with any of the parameters that it
needs to connect to its serving NOS (or equivalent TR-069 ACS). The parameters
must be provided via the built-in commissioning web page. In this case, follow the
procedures in the rest of this section.
The rest of this section is only applicable to commissioning with the built-in web page. If this
is not enabled, proceed to the hardware installation procedure in section 4.
When using the commissioning web page, the nanoLTE E61 AP can be commissioned
either in advance of the site visit via a commissioning computer or on site via a
commissioning laptop. The web page based procedure is identical in both cases. To allow
for both of these scenarios, the term commissioning terminal is used to refer to any laptop
or computer used for commissioning.
The topics in this section are:
• 3.1 Requirements for Commissioning with the Web Page
• 3.2 Redirector First Contact and NTP Synchronisation for Software Update
• 3.3 Configure a Commissioning Terminal
• 3.4 Access the Commissioning Web Page for the LTE AP
• 3.5 Optional - Software Download
• 3.6 Configure the Connection to the NOS Server
• 3.7 Commissioning Complete