Technical data

6
Press the button (> 2 seconds) until the value for the •
temporary hardness rises and keep it pressed until the
desired value has been reached.
> 2 sec
12 10.12.08
13
30
gpg
US
gaL
Typ
Briefl y press the button (< 1 second) until the value for •
the fi lter system size fl ashes.
12 10.12.08
13
12
gpg
US
gaL
Typ
Press the button (> 2 seconds) until the value for the •
fi lter system size rises and keep it pressed until the
desired value has been reached.
> 2 sec
12 10.12.08
13
12
gpg
US
gaL
Typ
The set parameters temporary hardness and fi lter system size can now be accepted or the further
parameters of monthly limit and hardness type also set. If you want to accept the parameters, pro-
ceed as follows, otherwise continue with the chapter “parameter input monthly limit“.
Press button 1 x (< 1 second) until the message •
“Reset“ appears and fl ashes.
10.12.08
13
12
gpg
US
gaL
Typ
Press button 1 x (> 2 seconds) until the total capacity •
and the current date appear.
> 2 sec
10.12.08
13
gpg
US
gaL
1747
The set parameters have been accepted.
Insert display unit from front at a height of approx. 0.4 inches (10 mm) and slide down. •
The loops on the display part must be inserted in the grooves on the measuring head.
Continue with Chapter 3.4 Flushing / Draining for Filter Systems with and without Measuring and
Display Unit.
Parameter input monthly limit
Press button 2 x (< 1 second) to access the next •
parameter input monthly limit. Monthly limit fl ashes.
10.12.08
13
gpg
US
gaL
12
12
Typ
Press the button (> 2 seconds) until the value for •
the monthly limit rises and keep it pressed until the
desired value has been reached.
> 2 sec
10.12.08
13
gpg
US
gaL
12
12
Typ