Manual

Swedish Mauser Rifle Manual

1999 Anders J.

Attachment of the scope

1. Align the mount and base and push the scope forward.

2. Align the lever (spännarm) on the mount with the pin (spännstift) on the base and

push the lever forward so that the front of the mount bears against the recoil stop

screw (ställskruv).

Removal of the scope

The scope is removed by pushing the lever to the rear.

Sighting in the scope

The scope is adjusted so that the point of aim and point of impact are the same when the

range dial is set on the shooting distance. Any adjustments to the point of impact is to be

made by an armourer only.