Manual

Swedish Mauser Rifle Manual
1999 Anders J.
6
8. Disassembly
1. Unload.
2. Safety off.
3. Open bolt appr.5cm.
4. Close bolt (cocking the firing pin).
5. Put the safety in its middle position
(straight up).
6. Push the bolt stop (slutstycksspärr) to
the left and remove the bolt.
7. Unscrew the bolt sleeve (styrhylsa).
8. Place the firing pin against a non-
damaging surface. Place the thumb
over the cocking piece (tändstifts-
mutter) and press down on it so that the
cocking piece clears the bolt sleeve.
9. Turn the cocking piece a ¼ turn and
remove it.
10. Ease up the firing pin spring; remove
the bolt sleeve and safety.
11. Remove the spring from the firing pin.
12. Push in the floor plate (magasins-
botten) catch with the rear end of the
firing pin.
13. At the same time push the floor plate
backwards so that it clears the catch.
14. Remove the floor plate, magazine
spring (magasinsfjäder) and follower
(patronförare).