Manual

Swedish Mauser Rifle Manual

1999 Anders J.

4. Bayonet

The bayonet is attached by placing the

hollow handle over the cleaning rod and

slipping the muzzle ring over the muzzle.

The bayonet is then pressed down until it

snaps in place.

5. Blank Firing Device

The blank firing device is to be used when firing blank ammunition. It is attached in the

following way:

1. Remove the cap protecting the threads on the muzzle.

2. Screw the blank firing device on the muzzle. It’s to be seated fully down; or else the

threads can be damaged during firing.

3. Fold down the locking frame (låsbygel) and check that it snaps in place.

The blank firing device is removed in the reverse way.