User`s manual

2-16 Chapter 2: BIOS setup
2.4.4 Onboard Devices Configuration
Configure Win627EHG Super IO Chipset
Quick Resume Technology [Enabled]
HD Audio Controller [Enabled]
Front Panel Support Type [AC97]
Onboard PCIEX GbE LAN [Enabled]
LAN Option ROM [Disabled]
ITE8211F Controller [Enabled]
Detecting Device Time [Quick Mode]
Serial Port1 Address [3F8/IRQ4]
Parallel Port Address [378]
Parallel Port Mode [ECP]
ECP Mode DMA Channel [DMA3]
Parallel Port IRQ [IRQ7]
HD Audio Controller [Enabled]
Enables or disables the Azalia/AC’97 CODEC.
Configuration options: [Enabled] [Disabled]
OnBoard PCIEX GbE LAN [Enabled]
Allows you to enable or disable the onboard PCI Express Gigabit LAN controller.
Configuration options: [Disabled] [Enabled]
LAN Option ROM [Disabled]
Allows you to enable or disable the option ROM in the onboard L AN
controller. This item appears only when the Onboard LAN item is set to
Enabled. Configuration options: [Disabled] [Enabled]ITE8211F Controller
[Enabled]
Enables or disables the onboard ITE
®
8211F IDE controller.
Configuration options: [Enabled] [Disabled]
Detecting Device Time [Quick Mode]
Sets the ITE8211F detecting device time. If the devices installed on
the ITE IDE connector cannot be detected, set this item to Standard
M od e t o ena ble c o mp le te d et ec t in g pr oc e ss . T hi s item a pp e ar s
only when the ITE8211F Controller is Enabled.
Configuration options: [Standard Mode] [Quick Mode]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]