User`s manual

2-8 Chapter 2: BIOS setup
PIO Mode [Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1]
[SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2]
[UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology. Configuration
options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
2.3.5 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
IDE Configuration
Configure SATA As [Standard IDE]
Onboard IDE Operate Mode [Enhanced Mode]
Enhanced Mode Support On [S-ATA]
OnBoard Serial-ATA BOOT ROM [Disabled]
IDE Detect Time Out (Sec) [35]
Configure SATA As [Standard IDE]
Sets the Serial ATA configuration.
If you want to use your Serial ATA like a Parallel ATA physical storage interface,
select the Standard IDE option.
Configuration options: [Standard IDE]
Onboard IDE Operate Mode [Enhanced Mode]
Dis ab les or allows sel ecti on of the IDE oper at ion mo de dep ending on
th e o perat ing sy ste m ( OS) t hat you ins ta lle d. Se t to E nhanc e d M od e
if you ar e usin g native OS , such as W ind ows
®
20 0 0 / X P/ 20 0 3 Se r ver.
Configuration options: [Disabled] [Compatible Mode] [Enhanced Mode]