User manual

41 AIMB-562 KIOSK User Manual
Chapter 3 BIOS Operation
3.2.8 Power Management Setup
Note! Adjust “Power management Setup” to configure the system to most
effective energy savings still consistent with the intended style of use.
! PCI Express PM Function
This allows you to control Power On by onboard LAN chip feature.
! Power-Supply Type [ATX]
This item allows user to set power-supply type, ATX or AT mode.
! ACPI Function [Enabled]
This item defines the ACPI (Advanced Configuration and Power Management)
feature that makes hardware status information available to the operating sys
-
tem, and communicates with PC and system devices for improving the power
management.
! ACPI Suspend Type [S3(STR)]
This item allows user to select sleep state when in suspend.
S1(POS) The suspend mode is equivalent to a software power down;
S3(STR) The system shuts down with the exception of a refresh current to
the system memory.
! Run VGA BIOS if S3 Resume [Auto]
This item allows system to reinitialize VGA BIOS after system resume from
ACPI S3 mode.
! Power Management [User Define]
This item allows user to select system power saving mode.
Min Saving Minimum power management. Suspend Mode=1 hr.
Max Saving Maximum power management. Suspend Mode=1 min.
User Define Allows user to set each mode individually. Suspend Mode= Dis-
abled or 1 min ~1 hr.