User manual

19 AIMB-562 KIOSK User Manual
Chapter 2 Connecting Peripherals
2.9 Front Panel Connectors (JFP1)
There are several external switches to monitor and control the AIMB-562 KIOSK.
B 5 and 7 Reset switch
C 1 and 3 Hard drive activity LED
D 2 and 4 Power/Sleep/Waiting LED
E 6 and 8 Power switch
2.9.1 Power/Sleep Waiting LED (JFP1)
JFP1 pins 2 & 4 is a 2-pin connector for the power LED. Refer to Appendix B for
detailed information on the pin assignments. If a PS/2 or ATX power supply is used,
the system's power LED status will be as indicated below:
PSON1
(On Back plane)
Jumper setting
2-3 pin closed 1-2 pin closed
Connect 1-2 pin cable
with switch
System On On On On
System Suspend Fast flashes Fast flashes Fast flashes
System Off Slow flashes Off Off
Table 2.2: ATX power supply LED status (No support for AT power)
Power mode
LED
(ATX Power Mode)
(On/off by
tentative button)
LED
(AT power Mode)
(On/off by switching
power supply)
LED
(AT power Mode)
(On/off by front
panel switch)
JFP1