User manual

AIMB-562 KIOSK User Manual 12
2.1 Introduction
You can access most of the connectors from the top of the board as it is being
installed in the chassis. If you have a number of cards installed or have a packed
chassis, you may need to partially remove the card to make all the connections.
2.2 Parallel Port (LPT1)
The parallel port is normally used to connect the motherboard to a printer. The AIMB-
562 KIOSK includes an onboard parallel port, accessed through a 25-pin flat-cable
connector, LPT1.
Note! Parallel cable is not enclosed in the box as a standard accessory. The
order part number is 1700008809.
LPT1