User manual

AIMB-562 KIOSK User Manual 4
! Power consumption:
+5 V @ 4 A, +3.3 V @ 1.02 A, +12 V @ 2.35 A, 5 VSB @ 0.26 A, -12 V @ 0.12
A Measure the maximum current value which system under maximum load
(CPU: Top speed, RAM & Graphic: Full loading)
! Board size: 244 mm x 244 mm (9.6" x 9.6")
! Board weight: 0.75 kg
1.4 Jumpers and Connectors
Connectors on the AIMB-562 KIOSK motherboard link it to external devices such as
hard disk drives and a keyboard. In addition, the board has a number of jumpers
used to configure your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc
-
tions for connecting external devices to your motherboard.
CMOS1 CMOS clear
JCASE1 Chassis Instruction Connector
PSON1 AT/ATX mode selector
JSETCOM3456 Serial port:RS232/RS422/RS485 jumper setting
JSETCOM78910 Serial port:RS232/RS422/RS485 jumper setting
JLVDSPWR1 LVDS Power Jumpr Selection
Table 1.1: Jumpers
Label Function
Table 1.2: Connectors
Label Function
JFP1
Reset connector
HDD LED connector
ATX soft power switch (PS_ON)
Power/Sleep waiting LED
LPT1 Parallel port
USB56 USB port 5, 6 (on board)
USB78 USB port 7 8(on board)
VGA1 VGA connector
VGA2 2nd VGA connector
COM1/COM2 Serial port: COM1/COM2 (9-pin connector)
COM3~6/COM7~10 Serial port: COM3~-6/COM7~10 (40-pin connector)
KBMS1
PS/2 keyboard and Mouse connector
Cable length: 20 meter
CPU_FAN1 CPU FAN connector
SYS_FAN1 System FAN connector 1
USB12 USB port 1,2
LAN2_USB34 LAN2/USB port 3,4
SATA1 Serial ATA0
SATA2 Serial ATA1
ATX12V1 ATX 12 V Auxiliary power connector