User manual

3
Legal & Safety Stuff
These instructions provide important information concerning the proper operation
of the product. Only use this product after carefully reading the operating
instructions included with the product and all warnings and labels on the product
packaging, including the manual and any separately included sheets. Only use
this product with the included accessories and the included power adapter. Do
not use this product or any Matter and Form Inc. online services for purposes
that could infringe on the intellectual property of a third party. Matter and Form
Inc. assumes no responsibility whatsoever with regard to the infringement of
intellectual property through use of the Matter and Form 3D Scanner or Matter
and Form Inc. online services. The MFS1V1 3D Scanner comes with a limited
one-year warranty, in addition to any warranties mandated by local laws. Details
of the one-year limited warranty can be found at https://matterandform.net/legal
Matter and Form Inc.
442 Dufferin St., Suite A
Toronto, Ontario
Canada, M6K 2A3
Please note the following important safety instructions:
 Do not operate this product if it is damaged, or if the power cable or USB
cable are damaged or if any of its internal features are exposed.
 Only use the cables and power adapters provided with the scanner. If you
require a replacement, please contact Matter and Form Inc. at
[e-mail]
 Do not operate the product when wet. If it should become wet, do not turn
it on. Disconnect it from its power source and do not operate it until
completely dry.
 Do not touch the camera lens, laser lenses or laser housing.
 If your product requires maintenance or repair, contact Matter and Form
Inc. at [e-mail]. Do not attempt to open or repair the
product on your own, as it may be hazardous and will void your warranty.
FCC Class B Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are