User manual

44
Cam Feed Tab
The Cam Feed tab shows what the camera is seeing. At the bottom there is a
checkbox “Throttle Camera Feed (Use during scanning on a slow computer)”.
When this is checked, only one in four images from the camera actually get
displayed; the others are discarded in order to lower CPU usage. It doesn’t
affect the scan. However, if you have a very slow computer, keeping this
checked to reduce the strain on the CPU is a good idea.
Laser Line Detection Tab
The Laser Line Detection tab is used to visualize where the lasers are being
detected. This is the most important aspect of advanced scanning. This screen
shows a visual representation of the laser lines, and you can adjust the
exposure of the camera until you get the best visualization possible. When your
laser line is “clean”, meaning that it doesn’t have a lot of noise (appears as fuzzy