User manual

10
5. The scanner will rotate the calibration box left and right on the turntable,
firing its lasers and collecting a range of data. Please be patient. This process
can take several minutes.
6. Once the first step of calibration is done, follow the instructions for Calibration
Step 2 and move the calibration box forward. Click "Continue Calibration"
when the box is in its new position.
7. The scanner will rotate and fire its lasers again. Be patient and avoid moving
the box. Step 2 will take slightly longer than Step 1 as the software compares
the data between Step 1 and Step 2.