User manual

9
Calibrating the Scanner
Calibrating the scanner may be the single most important step to take in order to
get good results. Calibrating your scanner on a regular basis ensures that you
get the most accurate results from your scan. To calibrate:
1. Make sure your scanner is connected to your computer and powered on.
2. Open the Matter and Form scanner software.
3. There are three options on the left on the start screen. Click "Calibrate" to
start the calibration process.
On Windows:
On Mac:
4. A new screen will open.
4. Follow the diagram above and place your calibration box in the center of the
scanner bed. Click "Continue Calibration".