Manual

In the Combined Results view, we
can see that the laser lines are dull,
fuzzy and Laser 2 is barely visible.
The exposure is likely too low.
Moving the Laser 1 Exposure slider
far in the other direction results in
brighter but fuzzier lines with a lot
of gaps.
With Laser 2 locked, the slider is
moved to find the best exposure.
The lines are stronger but not fuzzy
and gaps have been minimized
(note: the space on the line on the
right is a gap between the rhino’s
belly and foot)
To see if Laser 2 Exposure could
improve, it was unlocked and
adjusted by one step. Laser 2 is
now as bright and clean as Laser 1.
The rhino is ready to scan.
72
