User guide

Setting up your Digital Box with a SCART cable - continued
Option 2: connecting to a TV and VCR
• [Skip this single step if your VCR has just one SCART
socket]: Connect the SCART cable between the VCR
socket on your Digital Box and your VCR's SCART IN
socket.
• Connect a SCART cable between the SCART OUT socket
on your VCR and your TV's SCART IN socket.
• Connect the RF cable between the 'RF OUT' socket on the
Digital Box and the RF input socket on your VCR.
• If there isn’t already one in place, connect a second RF
cable between the RF output on your VCR and the RF
input socket on your TV.
5 Connect the power cable
• Make sure the mains outlet is switched off.
Connect the power supply into the mains outlet.
• Insert the small power cable plug into the
'5V DC IN' socket on the Digital Box.
6 Switch on your TV
• Switch on your TV.
• Switch on the mains outlet for the Digital Box. The Box’s
red light should show.
• Press [POWER] on your Box
remote. The Box’s green
light should show.
• Your TV should switch to
the Digital Box
automatically. If not, select
the AV channel using the
button on your TV remote
marked AV, EXT, TV/AV, O/E
or a symbol, or refer to your TV manual.
• If you cannot see the picture from the Digital Box, refer to
the problem solving section towards the end of this guide.
You are now ready to tune in to the digital TV service.
Please go to the section 'Using your Digital Box for the
first time'.
To the mains
power outlet
To your TV
To your
VCR
To your
VCR
From your
roof aerial
7