User guide

When a programme being broadcast is blocked by the
parental control setup, you can override the settings and
watch the programme by entering your PIN number.
Changing your PIN number
To set or change your PIN, choose the Change PIN option
from the Parental Control menu. The default PIN is 0000.
• To change your PIN, highlight the Change PIN box and type
in the PIN you want.
• Type it again in the Confirm New PIN box.
Lock/unlock individual channels
• On the Parental Control
menu, choose the
Lock/Unlock Services
option.
• Use [
^
] and [ ] to
highlight the
channel/s you wish to lock
or unlock.
• Press [OK] to switch
between the Lock/Unlock
setting.
If you lose your PIN, please refer to the instructions in the
General Problem Solving section on page 18.
^
The Parental Control feature allows you to lock or unlock
channels or change the censorship options (where available)
using a PIN number. Please note that this feature works only
when the broadcaster transmits censorship information.
• Press [MENU] to access the Setup Menu.
• Use [ ] to highlight Channel Setup then press [OK].
• Choose the Parental Control option.
• Type in your PIN - the default PIN is 0000.
• Use [<] or [>] to change the Censorship level. These
settings affect the entire service on your Digital Box. To
lock or unlock individual channels, see below.
The parental control options are:
• Block will block all channels
• 18 will block channels with an age rating of 18+
• 15 will block channels with an age rating of 15+
• 12 will block channels with an age rating of 12+
• 6 will block channels with an age rating of 6+
• Off will not block any services
^
Using parental controls to block channels
13