User guide

Timer Programming
You can set the Digital Box's Programme Timer to
switch the Box to any channel you choose, at any time
you choose. So you'll always see (or be able to record)
your favourite programmes!
For the duration of the timer
programme, the Box's green
light will flash and it will not
respond to the remote control
unless you press [EXIT].
If you wish to record a
programme, make sure
your video is set to the
Digital Box channel and
set to record at the time your programme is on.
(Please note that you cannot record one digital channel and
watch another digital channel at the same time).
• Press [MENU] to open the Setup Menu.
• Press [ ] to highlight Timer Programming and press [OK].
• Press [ ] to highlight a free event or an event you wish to
edit and press [OK].
• Press [<] and [>] to change the channel number, or enter
the 3-digit channel number directly using the number
buttons [0-9], eg, for channel 17 type ‘017’.
• Press [ ] to highlight 'Date' and press [<] and [>] to
change the date, or enter a date directly using the buttons
[0-9]
^
^
^
• Press [ ] to highlight 'Time' and press [<] and [>] to
change the time or use the buttons [0-9] to type in the
time directly. (Use the 24 hour clock: e.g for 5 pm type
17:00.)
• Press [ ] to highlight 'Duration' and use the number
buttons [0 - 9] to type in the length of the program or use
[<] and [>] to change the duration.
• Press [ ] to highlight 'Repeat'. Press [>] to choose from
daily, weekly, Monday to Friday or Monday to Saturday. If
your programme is not part of a series leave 'Repeat' set to
'No'.
• Press [ ] to highlight 'Subtitles'. Press [>] to choose 'yes'
or 'no'. Please note that not all channels broadcast
subtitles.
• When you are happy that all options have been set
correctly press [OK] to store your programme. Your set
Timer Programmes will be shown.
• If Parental Controls are set on the channel, you will be
asked to enter your PIN in order to complete the Timer
Programme.
• To exit Timer Programming press [MENU].
• To review or change any of your Timer Programmes, press
[MENU] and follow the steps above.
^
^
^
^
11