User`s manual

3: BIOS Setup Utility
35
Features Setup Page
This page sets up some parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Enabled
OnBoard Serial PortA 3F8h/COM1
OnBoard Serial PortB
2F8h/COM2
Serial Port2 Mode Normal
OnBoard Parallel Port 378h
Parallel Port Mode SPP
Parallel Port IRQ
7
Parallel Port DMA N/A
OnBoard Game Port 201h
OnBoard MIDI Port 300h
MIDI Port IRQ 10
OnBoard IDE Both
Audio Device Enabled
Modem Device Auto
Ethernet Device Enabled
USB Controller All USB Port
USB Device Legacy Support
Disabled
ThumbDrive Support for DOS Disabled
ESC : Quit ↑↓←→ : Select
Item
F1 : Help PU/PD/+/ - : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
OnBoard FDC
Use this item to enable or disable the
onboard floppy disk drive interface.
OnBoard Serial
PortA/B
Use these items to enable or disable the
onboard COM1/2 serial port, and to assign
a port address.
Onboard
Parallel Port
Use this item to enable or disable the
onboard LPT1 parallel port, and to assign a
port address. The Auto setting will detect
and available address.
Parallel Port
Mode
Use this item to set the parallel port mode.
You can select SPP (Standard Parallel
Port), ECP (Extended Capabilities Port),
EPP (Enhanced Parallel Port), or ECP +
EPP.
Parallel Port
IRQ
Use this item to assign IRQ to the parallel
port.