User`s manual

2: Mainboard Installation

If you have installed a modem, use the cable provided with the

modem to plug into the mainboard WOM1 connector. This enables

the Wake On Modem (WOM1) feature.

When your system is in a power-saving mode, any modem signal

automatically resumes the system. You must enable this item using

the Power Management page of the Setup Utility. See Chapter 3

for more information.

Pin Signal

1 5VSB

2 GND

3 -RING

CD1/2:CD-ROM/DVD Audio Input Connector

If you have installed a CD-ROM drive or DVD-ROM drive, you

can connect the drive audio cable to the onboard sound system.

On the mainboard, locate the two 4-pin connectors CD1 and CD2.

There are two kinds of connector because different brands of CD-

ROM drive have different kinds of audio cable connectors.

Connect the cable to the appropriate connector.

CD1

Pin Signal

1 CD IN L

2 GND

3 GND

4 CD IN R

CD2

Pin Signal

1 GND

2 CD IN R

3 GND

4 CD IN L