User`s manual

Connecting Front Panel Components

After installing the motherboard in the system housing, you should connect the front panel

components to the Front Panel Connector, J54. Check the figure below for pin assignments.

Completing System Configuration

After installing the motherboard in the system housing, you can connect or install the internal

devices you need to complete the system. This will include attaching disk drives and connecting

housing power supply connectors. After replacing the system housing cover, you can connect

external peripherals such as a monitor, a keyboard, and a pointing device.

Once you have completed final hardware installation, you can configure the CMOS Setup Utility

and Drivers - see the following chapters - and install operation system and support software - see